Month: April 2022

Sundstrand Sauer Danfoss Series 10/38 – Change Valve Block

You can take off the valve manifold assy and reinstated as a whole unit. The instructions show you how to take it apart.   Take off the hex cap screws and raise up the manifold off the motor end cap. There are two ports that are closed off with orings and two joining ports that …

Sundstrand Sauer Danfoss Series 10/38 – Change Valve Block Read More »

How a Reservoir Works and Types

Tupelo Hydraulics would like to talk about Reservoirs and the different types and its importance: Industrial reservoirs come in a variety of styles among which are the L shaped,overhead and the conventional reservoir. Besides acting as a fluid container, a reservoir serves also to cool the fluid, to allow contamination to settle out and to …

How a Reservoir Works and Types Read More »

Parker/Denison M4D/M4SD/M4D1/M4SD1 Vane Motor

  Parts diagram breakdown of this unit. Helps tell where parts go and what parts you do need to do a repair job. It is helpful to take to your mechanic for repairs.     If we can assist with type of vane motor or any other types of motors or pumps, let us know..we …

Parker/Denison M4D/M4SD/M4D1/M4SD1 Vane Motor Read More »

Eaton Manual Displacement Control With Inching

This unit is used on vehicles that have propel transmission. It uses a foot pedal to control it. You can preset speed settings for it to run better, to stop it easily, use the emergency stopping while using a clutch and brake pedals, use the inching implement smoothly and use preset road speeds with foot …

Eaton Manual Displacement Control With Inching Read More »

Rexroth A6VM/AA6VM Hydraulic Pump – Startup

The motor needs to be filled up with fluid (fill the case chamber), start on low speed and don’t put a load pressure on it til you bleed it out. If not used in awhile, fluid can leak out thru the case in the lines. Fluid needs to be in the lines to start it …

Rexroth A6VM/AA6VM Hydraulic Pump – Startup Read More »

Dynapower Series 4.5 & 6.0 Phase lV Variable Displacement Pump

A variable displacement pump is a device that converts mechanical energy to hydraulic fluid energy. The displacement, or amount of fluid pumped per revolution of the pump’s input shaft can be varied while the pump is running. Many variable displacement pumps are “reversible”, meaning that they can act as a hydraulic motor and convert fluid …

Dynapower Series 4.5 & 6.0 Phase lV Variable Displacement Pump Read More »

Parker/Denison Hydraulics T6ED – T6EDM – T6EDP Vane-Type D

  Let us know if you need repairs done on a Parker/Denison pump or motor. Call us at 662-871-8403 sales@tupelohydraulics.com

PARKER/DENISON HYDRAULIC T6DCC – T6DCC Hydraulic Pump

  General Information of this pump This tells what each item is on this pump. Will help in ordering parts . If you need further assistance, call us at 662-871-8403 sales@tupelohydraulics.com